Загрузка
KKT-2X9,7
Поставщик Европейских уплотнений
г. Санкт-Петербург

пр. Луначарского 72 к 1 офис 2А

KKT is a rod-piston guide strip designed to be used in medium duty hydraulic and pneumatic systems.

Характеристики:

Тип профиля
KKT
Материал
PTFE CARBON
Размер (мм)
2X9,7
Все характеристики
Артикул33364
0
Санкт-Петербург:Под заказ

KKT is a rod-piston guide strip designed to be used in medium duty hydraulic and pneumatic systems.

PRODUCT ADVANTAGES
• Easy assembly
• Medium load bearing capacity
• Able to work on dry conditions
• Easy to use in all dimensions because of being strips
• Low friction , free of stick-slip
• Superior load cushioning effect
• Able to absorb the small particles that is in the system

APPLICATION
Construction machinery , cranes , injection moulding machines , control and regulation equipment , chemical industry and standard cylinders.

MATERIALKODU
PTFE (Carbon filled) PT6002
OPERATING CONDITIONS
Mineral yaglar (DIN 51524)
TEMPERATURE -200°C +200°C
DYNAMIC CONTACT PRESSURE<=8 N/mm2
SPEED<=15.0 m/sn

Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESSRaRmax
Sliding Surface ?D-?d<=0.3 ?m<=2.5 ?m
Groove Base ?Db- ?dp<=1.6 ?m<=10 ?m
Groove Flanks B<=3.2 ?m<=12 ?m

INSTALLATION

Easily assembled into the housing by hand. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.

NOTES
We recommend cutting the ready strip with 30° angle before using it. The length of the strip can be using the formula in section Calculation of Width & Cross Sectional Thickness of Guide Elements. The permissible sealing gap values of KKT guide strip is given in the below table.

PERMISSIBLE SEALING GAP
Diameter (mm)Smax (mm)
10-250.25±0.05
26-1000.30±0.05
101-3000.40±0.10
301 -6000.60±0.15
601-12000.80±0.20
> 12000.90±0.30

Note: The largest sealing gap value occurring
on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.

Тип профиля
KKT
Материал
PTFE CARBON
Размер (мм)
2X9,7