K64-004

Купить K64-004

K64 is a single acting pneumatic rod seal ensuring that foreign particles are not introduced into the pneumatic cylinders. The lip is designed in a particular way that it functions as a rod seal and wiper.

32279
Санкт-Петербург: Под заказ
Европа: Осталась 1 штука
Под заказ × шт.

K64 is a single acting pneumatic rod seal ensuring that foreign particles are not introduced into the pneumatic cylinders. The lip is designed in a particular way that it functions as a rod seal and wiper.

PRODUCT ADVANTAGES
•Superior sealing effect
•Superior wiping effect
•Low dynamic friction
•Minimal space requirement
•Highly wear resistant

APPLICATION
Compact and special small cylinders

MATERIAL CODE
PU 92 SHORE A PU9201
OPERATING CONDITIONS
MEDIAPrepared , dried and de-oiled compressed air
TEMPERATURE-30°C +80 °C
PRESSURE≤16 Bar
SPEED≤1.0 m/sec

Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESSRmax
Sliding Surface Ød≤4 μm
Groove Base ØD≤10 μm
Groove Flanks B≤15 μm

INSTALLATION

It can be assembled into closed groove without any tools. K64 does not need additional element such as circlip for axial fitting within the housing. We recommend using special assembly tool. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.

Тип профиля K64
Материал PU
Размер 4X8,1X3/4

K64-004 отзывы

Оставьте отзыв об этом товаре первым!